-40%
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V
1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V

1 HP Direct Drive Blower Motor, Permanent Split Capac, 1075 Nameplate RPM, 115 V

$ 92.4

Availability: 100 in stock
  • Thermal Protection: Auto
  • Length Less Shaft: 6
  • Number of Speeds: 3
  • Motor Sub Application: Direct Dr Fan/Blower
  • Condition: Motor problem was miss-diagnosed. This motor was in service for 1 week and replaced with the orgional
  • Phase: 1
  • Hz: 60
  • Restocking Fee: No
  • HP: 1
  • Brand: AO Smith
  • Rotation: CW/CCW
  • Mounting: Ring
  • Motor Type: PSC
  • Shaft Dia. (In.): 5/8
  • Max. Ambient Temp.: 40 Degrees C
  • Refund will be given as: Money Back
  • Nameplate RPM: 1075
  • Duty: Continuous
  • All returns accepted: Returns Accepted
  • NumberOfItems: 1
  • Full Load Amps: 10.0
  • Application: Blowers, Fans and Air Circulators
  • Voltage: 115
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Enclosure: Open Air-Over
  • Stud Size: #10-32 x 1/2"
  • Bearings: ball
  • MPN: 4mb10
  • RPM Range: 1001-1100
  • Body Dia.: 6-1/2"

    Description

    This blower motor was in service for only 1 week.  The HVAC technician we hired deemed the previous motor bad. We purchased this motor to replace. Only to find that the motor wasn't the problem. Needles to say we couldn't return this motor to where we had purchased. The retail price on this motor new is over 0.00. Or loss is your gain. Virtually a brand new motor.  Specs are listed below
    Technical Specs
    Item
    Direct Drive Blower Motor
    Motor Application
    HVAC/R
    Motor Sub Application
    Direct Drive Fan/Blower
    Motor Design
    Permanent Split Capacitor
    Motor Enclosure Design
    Open Air-Over
    HP
    1
    Nameplate RPM
    1075
    Voltage
    115
    Full Load Amps
    10.0
    Hz
    60
    Phase
    1
    Frame
    56YZ
    Motor Service Factor
    1.00
    Max. Ambient Temp.
    40 Degrees C
    Ins. Class
    B
    Duty
    Continuous
    No. of Speeds
    3
    Motor Mounting Type
    Stud
    Motor Mounting Position
    All Angle
    Motor Bearings
    Ball
    Motor Thermal Protection
    Auto
    Motor Shaft Rotation
    CW/CCW
    Body Dia.
    6-1/2"
    Length Less Shaft
    9-13/16"
    Shaft Dia.
    5/8"
    Shaft Length
    6"
    Motor Shaft Design
    Flat
    Capacitor Required
    2MDW3
    Resilient Ring Dia.
    2-1/2"
    Ring to Ring Center
    9-5/16"
    Mounting Stud Location
    Shaft End
    Mounting Stud Pattern
    4-1/8" x 4-1/8"
    Stud Size
    #10-32
    RPM Range
    1001-1100